Building Admixtures

Bostik Penetration Primer for Roofs is a highly penetrative solution used for priming bitumen roofing felt, concrete roofs and floors, cementitious screeds/renders, mastic asphalt, weathered corrugated iron, and steel prior to the application of bituminous coatings.

EVO-STIK Mortar Plasticiser is a ready to use liquid admixture, containing air entrapping agents, the effect of which is to plasticise a mix and thus provide a satisfactory fatty mortar for laying bricks and blocks without the use of lime. Available in 5Ltr and 25Ltr Drums

Evo-Stik Evo-Plast is a concentrated liquid waterproofing plasticiser for use with cement mortar mixes for external renderings as an aid in Dry harling, Pebble dashing, Rough casting, and similar finishes.

Larsen Mould Oil is a chemical release agent. It has been specifically formulated to provide easy release of formwork and to provide high quality surface finishes to concrete. The use of Mould Oil results in greatly reduced incidence of blow holes, staining and surface blemishes.

Triple Strength Medusa 330g provides economical and durable renders and mortars with increased water repellence and reduces surface water absorption, therefore reducing the amount of staining.

Bostik Cementone Integral Waterproofer reacts chemically with cement to form hydrophobic salts which reduce water penetration. Available in 5Ltr and 25Ltr containers

Sika 4a Waterstop is a ready to use, rapid setting waterproofing admixture. When mixed with water it will produce a paste for leak stopping against high water pressure infiltration.

Evo-Stik Evoset Frostproofer is designed to accelerate the setting of mortar mixes all year round but particularly in cold weather and during t he Winter months. Suitable for use where calcium chloride accelerators are not permitted.

Bostik Cementone Concentrated Mortar Plasticiser plasticises up to 125 bags of cement. Vinsol resin based formulation. Measuring chamber ensures the accurate dose for less waste, greater consistency and better mortar.

A concentrated plasticising admixture for site-mixed bricklaying and plastering mortars. Helps ensures consistent performance of mortars whilst improving workability and frost resistance.

Larsen Mortar Plasticiser is a plasticising/air-entraining admixture for site-mixed bricklaying and plastering mortars. It is manufactured from a blend of specially selected synthetic surfactants. Available in 5 and 25 Litre.